To enable manual con
fi
guration:
Touch the
Status Tab
and then touch the
Current IP
fi
eld. This display the Network
Con
fi
guration window.
Touch the
Con
fi
gure Manually
check box and click OK to accept the default value.
Using Windows 10
To access the RS4
fi
le system through a PC, running Windows 10:
You will have to con
fi
gure the PC TCP/IP settings. Open Control Panel, then
Network and
Sharing Center
, then
Change adapter settings
.
Double-click the desired connection (this is usually a Local Area Connection or Ethernet).
In the status dialog, click the
Properties
button.
In the item list, select
Internet Protocol (TCP/IP)
or if there are multiples, select
Internet
Protocol (TCP/IPv4)
.
Click the
Properties
button.
Select
Use the following IP address
and enter these values:
IP address
: 10.1.0.x; where x can be any value, 1 to 254 except 42
Subnet mask
: 255.255.255.0
Default gateway
: Leave empty
1.
2.
1.
2.
3.
4.
5.
6
.
RS4 Data Streamer | 10
