RS4 connected to multiple subampli
fi
ers
RS4 Options
The RS4 object con
fi
gures data storage from the RZ to the RS4. The object provides settings
for the number of channels, storage format, and decimation factor.
RS4 Options
By default, the RS4 uses the RZ device sampling rate. You can set a rate manually by clearing
the
Sample Rate Max
check box to enable the slider. You can also select the data format and
any scaling. If streaming from a PZ5 or PZA, due to the large input range and high
fi
delity, the
Float-32 format is recommended. If using a PZ2, Integer-16 format with Scaling set to 1e6 is
preferred.
Phantom Store
generates header information in the data tank. This is useful if you are reading
the RS4 data with TDT applications through the tank server. However, this consumes extra hard
disk space on your Synapse computer, so if you are going to read the
fi
les directly from the RS4
for your own custom analysis then leave this unchecked.
RS4 Data Streamer | 15
