18. Please do not use the appliance in places other than its intended use as
described in this instruction.
19. This appliance is intended for household use only.
20. Do not leave the heater on overnight.
21. When cleaning, ensure not to use a wet cloth or water on any part of the
unit, as this may cause a short circuit or electric shock.
22. Do not use the unit in any area where water is present.
23. Ensure the power is placed at the back, away from the front panel of the
heater.
24. When moving the appliance, do not touch the outlet grilles.
25. The heater must be installed in a position where the outlet grill is a
minimum of 1.80 meters from the floor, 250mm from the nearest side to an
adjacent wall and 150mm from the ceiling to the top face of the heater.
26. The plug cannot be under the heater.
FIXING TO WALL
1. Select a location for mounting the heater following the GENERAL
INSTRUCTIONS.
2. The Wall Mounting Baseplate should be positioned as shown in Figure 1.
3. If this heater is mounted above a shelf or other wall-mounted object, there
must be a minimum of 700mm clearance between the shelf and the outlet
grill.
4. The Wall Mounting Baseplate must be secured with all 4 screw
fixing points.
5. Securely fix the Wall Mounting Baseplate to the wall surface with the screws.
6. Fit the heater to the wall mounting baseplate by ensuring the 4 hooks on the
wall mounting baseplate and hearing the “click” of a lock.
7. The heater must be locked on the Wall Mounting Baseplate for safe operation.
8. To check the heater is fully locked to the mounting baseplate, attempt to slide
the heater upwards gently. It should be securely held in position.
9. To remove the heater from the wall Mounting Baseplate, insert a
less
than
¶
5 screwdriver into the hole located below the outlet of the heater, as shown in
Figure 3
