Figure 1
Figure 2
The product is mounted on a fixed plate
Figure 3
OPERATING INSTRUCTIONS
1, Pull the pull cord I to start the heater of 1200W. The indicator light will illuminate.
2, Pull the pull cord II for 2400W. The indicator lighter will illuminate.
3, Pull the pull cord III to turn the heater off.
Overheat Protection
The heater will turn itself off in the event of overheating. The most common cause of
overheating is deposits of dust or fluff entering the appliance. Ensure these deposits
are removed regularly by cleaning the inlet and out grills. The heater will
automatically re-set when it has cooled down.
CLEANING YOUR FAN HEATER
1. Always disconnect the appliance from the main supply before cleaning.
2. Clean the outside of the heater by wiping with a damp or dry cloth.
3. Do not use petroleum, any other detergent or chemical solvent to clean the heater.
4. When the heater is not used for a long time, it should be protected from dust and
stored in a clean dry place.
