114-13233
Rev B
2
of 13
2.
REFERENCE MATERIAL
2.1.
Revision Summary
Updated document to corporate requirements and updated text in Paragraph 2.2
2.2.
Customer Assistance
Reference Product Base Part Numbers 1445692, 2000314, and Product Code H723 are representative
numbers of Quadrax DSub Connectors and Contacts. Use of these numbers will identify the product line and
help you to obtain product and tooling information. Such information can be obtained through a local TE
Representative, by visiting our website at www.te.com, or by calling PRODUCT INFORMATION or the
TOOLING ASSISTANCE CENTER at the numbers at the bottom of page 1.
2.3.
Drawings
Customer Drawings for product part numbers are available from the service network. If there is a conflict
between the information contained in the Customer Drawings and this specification or with any other technical
documentation supplied, the information contained in the Customer Drawings takes priority.
2.4.
Manuals
Manual 402-40 is available upon request and can be used as a guide to soldering. This manual provides
information on various flux types and characteristics with the commercial designation and flux removal
procedures. A checklist is included in the manual as a guide for information on soldering problems.
2.5.
Specifications
and Qualification Test Report
provides product performance and test
information for the Quadrax Contacts. Test Specification
provides solderability requirements and
evaluation methods. The DSub connectors are tested to Product Specification
. Application
Specification
provides crimping procedures and requirements for the pin and socket contacts.
2.6.
Instructional Material
The following list includes available instruction sheets (408-series) that may provide assembly procedures for
product, operation, maintenance and repair of tooling.
Document Number
Document Title
Coaxial Cable Stripper Cable Kits 603995
Checking Terminal Crimp Height or Gaging Die Closure
Application Tooling for Screw-Machine Contacts
3.
REQUIREMENTS
3.1.
Safety
Do not stack product shipping containers so high that the containers buckle or deform.
3.2.
Limitations
The connectors are designed to operate within a temperature range of -65° to 125°C [-85° to 257°F].
NOTE
Temperature rating of the cable must be considered when determining operating temperature of the connector and cable
assembly.
3.3.
Storage
A.
Ultraviolet Light
Prolonged exposure to ultraviolet light may deteriorate the chemical composition of components used in
the contacts or connectors.
