1
of 4
© 2015 TE Connectivity family of companies
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
Instruction Sheet
408-9968
14 AUG 15
Rev A
Figure 1
1.
INTRODUCTION
The AMPACT Jumper Stud Kits 83452-1 through -4 consist of an AMPACT tap and a 19.05 mm [.750 in.] tin-
plated solid copper stud (p/n 83396-1). AMPACT Disconnect Kits 83470-1 through -9 consist of a disconnect
pigtail connector (p/n 83471-1, live line connector), an AMPACT tap, and a similar tin-plated solid copper stud
(p/n 83396-1). Disconnect Kits 2182452-1 through -5 consist of a disconnect pigtail connector (p/n 2182405-1
live line connector), an AMPACT TAP, and a 12.70 mm [.500 in.] tin-plated solid copper stud (p/n 83396-2).
MGV900’s casting weight is 0.89 kg [1.95 lbs] and MGV1200’s casting weight is 1.35 kg [2.95 lbs]. See Table 1
for more details. Section 3 is applicable for both jumper stud kits and disconnect kits while Section 4 is
applicable for disconnect kits only. All components of these kits meet or exceed the requirements for
ANSI C119.4.
NOTE
Dimensions on this sheet are in metric units [with U.S. customary units in brackets]. Figures and illustrations are for reference
only and are not drawn to scale.
Reasons for reissue are provided in Section 6, REVISION SUMMARY.
2.
DESCRIPTION
The AMPACT disconnect connector is a heavy duty high conductivity copper connector. Incorporated in the
body is a two bolt NEMA spaced pad for jumper terminal attachment. The disconnect utilizes wedge pressure
technology to provide reliable connection to the jumper stud. The disconnect is equipped with a hot stick
eyebolt and stabilizer ribs to facilitate easy and quick installation with hot sticks.
The connector kit or components are selected according to the wire combination shown in the selection chart,
Table 1.
AMPACT* Jumper Stud Kits 83452-[ ] and
Disconnect Kits 83470-[ ] and 2182452-[ ]
Jumper Stud Kit (3/4” Stud)
Disconnect Kit (1/2” Stud)
NOTE: Dimensions are for reference only.
AMPACT Tap
Assembly
Jumper Stud
Jumper Stud
Jumper Stud
AMPACT Tap
Assembly
Disconnecting Pigtail
Connector
Stabilizer Rib
Hot Stick
Eyebolt
Jumper Stud
100
°
100
°
