Page 48 / 101 ECOC: EGC0 ; LOC: AI
528050-1
412-18876 Rev. G
Use the Pneum. Parallel Crimp Machine AT-SC
only with conditioned air (lubricated and filtered).
Standard Filter: 30 µm
Connect
AIR MAX.
(Fig. 8.01, Pos. 1)
of the Pneum. Parallel Crimp Machine AT-SC to the main air
supply with the included black air hose Ø 8/6 mm.
Working Air Pressure:
6 bar/90psi
.
CAUTION!
Connect compressed air supply with supplied compressed air tube (length 1m).
The machine can only be depressurized by disconnecting the machine from the
main air supply (Fig. 8.01, Pos 1).
INFORMATION:
Use only lubricated and filtered compressed air.
8.2
Machine Set-Up Adjustments of the TE Crimp System
All Pneum. Parallel Crimp Machines AT-SC are
factory adjusted to the TE Crimp System (SDE
Adapter).
INFORMATION:
Do not change any factory adjusted settings!!
8.2.1
Inspection of the Crimp Height
DANGER!
Due to the risk of hand or finger injury, never try to reach into the machine.
Summary of Contents for AT-SC
Page 32: ...Page 32 101 ECOC EGC0 LOC AI 528050 1 412 18876 Rev G 17 3 Pneumatik Schema Abb 17 02...
Page 65: ...Page 65 101 ECOC EGC0 LOC AI 528050 1 412 18876 Rev G 17 3 Pneumatic Diagram Fig 17 02...
Page 98: ...Page 98 101 ECOC EGC0 LOC AI 528050 1 412 18876 Rev G 17 3 Sch ma Pneumatique Fig 17 02...
