Page 59 / 101 ECOC: EGC0 ; LOC: AI
528050-1
412-18876 Rev. G
14
Removal from Service, Demounting, Disassembly,
DANGER!
Due to the risk of hand or finger injury, never try to reach into the machine before
having assured that the machine is switched off.
CAUTION!
Before starting maintenance, disassembly or repair work, the crimping machine
must be disconnected from air supply.
Maintenance work may be performed only by authorized and properly trained
personnel.
Die adapter and dies may only be removed when the machine is not in operation
and has been disconnected from the air supply. The housing and the covers in
particular may only be removed by specially trained personnel.
Only one person is allowed to work on or with the machine at a time!
Work with caution.
The machine must not be removed from service before having dismounted the
adapter.
15
Storage
Store the machine in the original box at room temperature.
16
Disposal
For the disposal of the Pneum. Parallel Crimp Machine AT-SC, send it back to TE.
Summary of Contents for AT-SC
Page 32: ...Page 32 101 ECOC EGC0 LOC AI 528050 1 412 18876 Rev G 17 3 Pneumatik Schema Abb 17 02...
Page 65: ...Page 65 101 ECOC EGC0 LOC AI 528050 1 412 18876 Rev G 17 3 Pneumatic Diagram Fig 17 02...
Page 98: ...Page 98 101 ECOC EGC0 LOC AI 528050 1 412 18876 Rev G 17 3 Sch ma Pneumatique Fig 17 02...
