409-35011
Rev C
53
of 54
1.) Open Disconnect Enclosure as shown in Figure 61.
Figure 61
2.) Feed the power cord through the cable gland at the bottom of the Disconnect Enclosure.
3.) Connect line conductors to Main Disconnect Switch terminals as shown in Figure 62.
Figure 62
4.) After installing the power cord, tighten the cord cable gland to secure the cord. Reassemble
the Disconnect enclosure by reversing the steps detailed in Figure 61.
STEP 1
Remove 1 Dial Screw
and Remove Dial
STEP 2
Remove 2 Faceplate Screws
and Remove Faceplate
STEP 3
Remove 2 Cover Screws
and Remove Cover
L1
N or L2
Ground
Power Cord
Cable Gland