114-101088
4.4
Assembly Steps
Step 1
The following parts must be assembled in the following order on the cable (Figure 2).
1. COVER
2. CABLE SEAL
3. OUTER CRIMP FERRULE
Figure 2
Step 2
Remove wire sheath material as shown:
Remove outer sheath and foiled shielding according to determined length. (Figure 3)
Shorten shielding braid and filler. The shielding braid has to be combed out (brushed out).
Cutting length of combed out shielding braid and filler adjusted to 15±1mm (Figure 3).
Fold the shielding braid back. (Figure 4)
Rev B1
7 of
19
