1
of 13
© 2014 TE Connectivity family of companies
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
Application Specification
114-13233
11 APR 14
Rev B
NOTE
All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
Unless otherwise specified, dimensions have a tolerance of ±0.13 mm [±.005 in.] and angles have a tolerance of ±2°. Figures
and illustrations are for identification only and are not drawn to scale.
1.
INTRODUCTION
This specification covers the requirements for application of Quadrax DSub Connectors and Quadrax Contacts.
The Quadrax DSub Connectors consist of a four-position free hanging/ panel-mount plug, a right-angle printed
circuit (pc) board mount receptacle, and a free-hanging receptacle.
The Quadrax Pin and Socket Contacts shall be applied to appropriate Quadrax cables. The contact assembly
contains an outer shell, a one-piece dielectric, and four signal contacts. An inner crimp ferrule is included with
the cable applied contacts, and an optional sealing boot/plug is also available. These Quadrax Contacts may
also be used in other connector systems such as ARINC 600 Connectors, and MIL-DTL-38999 style
connectors. Contact TE Connectivity Product Engineering for specific application requirements for these other
product lines.
When corresponding with TE Personnel, use the terminology provided in this
s
pecification to facilitate inquiries
for information. Basic terms and features of this product are provided in Figure 1.
Figure 1
Quadrax DSub Connectors
and Quadrax Contacts
NOTE:
Figures and illustrations are for
reference only and are not drawn to scale.
Pin Shell
Pin Insert Dielectric
Slot
Pin Contact
Inner Ferrule
Cable Not
Included in Kit
Socket Insert
Dielectric
Positioning Key
Socket Contact
Slot
Wire Sealing
Boot (Optional)
Socket Shell
Wiring Key (Index Line)
