Page 16 / 47 ECOC: EGC0 ; LOC: AI
PN 9-744010-7
411-18315 Rev. H
4 Description
The SOLARLOK crimp hand tool consists in essence of a crimping head, two movable handles, two fixing
pins for the crimping head, and an emergency ratchet release. The slotted design of the crimping head
holder allows easy installation and removal of the crimping head.
Figure 1
Figure 2
1 Crimping head
5 Contact locator
2 Movable handle
6 Static die
3 Retaining pin
7 Movable die
4 Emergency release ratchet
5 Crimping head removal and installation
Removal
1. Close the tool handles (2) until the ratchet releases and allows the handles to open fully (see figure 3).
2. Loosen and pull out the retaining pins (3) (see figure 4).
3. Now take the crimping head (1) off the tool locator (see figure 5).
Figure 3
Figure 4
Figure 5
1
6
7
4
2
5
3
3
