-GB-4-
-GB-5-
INTRODUCTION
Congratulations !
You. have. just. purchased. one. of. the. world’s. most.
sophisticated.radar.and.laser.detectors.
Please.read.this.instruction.manual.before.installation..
All.instructions.are.necessary.to.achieve.optimum.use.
and.trouble-free.performance.from.your.BTST.
BTST FEATURES
1.
...
ON/OFF and Dim button (PWR)
..... Press. to. switch. the. BTST. ON/OFF.. To. select.
between. the. different. display. brightness. options,.
hold.this.button.down.for..seconds.
2.
.
Volume buttons (_/_)
.
Hold. down. to. adjust. the. volume. of. the. alarm.
tones.
3. MUTE button
.
Silences.the.audio.alert.
4. City/Highway button (CITY)
.
Decreases. the. sensitivity. to. radar. signals. when.
CITY-mode.is.engaged.
5. Speaker
6. Power Input Jack
7. Radar & Laser Sensor
8. 360 degree Sensor
9. Lock/Unlock button for windscreen bracket
.
10. Windscreen bracket
11. Power cord
12. Hook and loop fastener tape
13. Mini USB for charging
INSTALLATION
A. GENERAL GUIDELINES
•. Mount.the.detector.so.that.the.receiving.window/
sensor. has. an. un-obstructed. view. of. the. road.
ahead.
•. The.BTST.can.be.positioned.within.5°.of.horizontal.
without significantly degrading performance.
•. Do.not.mount.directly.behind.windscreen.wipers.
•. Do. not. mount. behind. a. mirrored. sunscreen,. as.
it has a thin layer of aluminium on a plastic film
which.will.block.radar/laser.signals..If.you.have.a.
heat reflective screen, you should have a ‘GPS
Gap’.by.the.interior.mirror.where.you.can.mount.
the.BTST.
B. MOUNTING TYPES
We.have.provided..types.of.mounting.methods.
1) DASHBOARD MOUNTING
.(Illustration.II)
•....The.hook.and.loop.fastener.Velcro.tape.provided..
may be used to mount your detector on a flat
dashboard..The.dashboard.must.be.clean.and.dry.
for.the.fastener.to.adhere.properly.
Summary of Contents for BTST
Page 1: ...I E...
Page 3: ...Illustration I Illustration III Illustration II 10 11 12...
Page 36: ...GR 43 BTST 09 10 V04...
