6
B
Placement precautions
o
Avoid placing the unit in direct sunlight or close to any
source of heat, such as a radiator, heater, open fireplace
or amplifier. Also avoid locations that are subject to vibra-
tions or exposed to excessive dust, cold or moisture.
o
Place the unit in a stable location near the audio sys-
tem that you will use with it.
o
As the unit could become warm during operation,
always leave sufficient space around it for ventilation.
When installing this unit, leave a little space (at least
3 cm or 1.2
"
) between it and walls and other devices
in order to allow good heat dissipation. When placing
it in a rack, for example, leave at least 5 cm (2
"
) open
above it and 10 cm (4
"
) open behind it. Failure to pro-
vide these gaps could cause heat to build up inside and
result in fire.
o
You may stack this unit with a PD-501HR or other 501
series units. However, if heat should cause the protec-
tion circuit to be activated and sound output stops
suddenly, place this unit on top and with sufficient dis-
tance between it and walls and other devices in order
to improve heat dissipation.
Before use
o
Do not place CDs, CD-Rs, cassette tapes, other audio
equipment or other items that are susceptible to heat
on top of the unit. Doing so could damage these items.
o
Do not put cloth on top of the unit or place the unit on
top of bedding or thick carpets. Doing so could cause
the unit to overheat and damage it.
o
Do not move the unit during use.
o
The voltage supplied to the unit should match the volt-
age printed on the rear panel. If you are in any doubt
regarding this matter, consult an electrician.
o
Do not open the body of the unit as this might result
in damage to the circuitry or cause electric shock. If a
foreign object should get into the unit, contact your
dealer or TEAC customer support.
o
When removing the power plug from the wall outlet,
always pull directly on the plug; never yank on the
cord.
o
Depending on the electromagnetic waves of television
broadcasts, interference might appear on television
screens when this unit is on. This does not mean that
this unit or the TV is malfunctioning. If this occurs, turn
this unit off.
