Connecting cables
When using the main unit (LX-1000) alone or with a single expansion unit
(AU-LX1000EPIO), they can be powered with a single battery unit (BU-LX1000).
When using two or three expansion units, two battery units are necessary.
Connect battery units and, if using them, AC adapters (included with the
LX-1000) as shown in the following illustrations.
16-channel and 32-channel models
AC adapter (included
with LX-1000)
48-channel and 64-channel models
AC adapter (included
with LX-1000)
AC adapter (included
with LX-1000)
Using with an external power supply
Power can be supplied to the LX-1000 by connecting AC adapters included with
the LX-1000 to the DC IN connectors of BU-LX1000 units.
The LX-1000 unit operates on 8V–36V DC.
To supply power using equipment other than the included AC adapter, correctly
follow the pin number assignments in the “DC IN power connector” chapter of
the LX-1000 Instructions for Use.
Equipment could be damaged if connections are made with incorrect pin num-
bers or voltage that exceeds the guaranteed voltage operating range is supplied.
Installing and removing batteries
Screw A
Screw A
1
Loosen the 2 screws (A) on the front and open the cover.
2
Insert the batteries (3) in the direction shown by the arrows
on them.
3
Close the cover and tighten the two screws (A) to fix it in
place.
o
Follow these procedures in reverse to remove the batteries.
Specifications
Batteries used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NP-L7S made by IDX Company, Ltd.
Number of batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 (sold separately)
DC power supply input
Rated input voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC 9–34 V
Guaranteed operating input voltage range . . . . . . . . . . . . . . . . . . . . . . . . . . . DC 8–36 V
Rated output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.8 V/18 V
External dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 (W) × 201.5 (D) × 44 (H) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .about 1.9 kg
Continuous operation time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . about 7 hours
(This is an estimate for a 16-channel model operating at room temperature with
AR-LXPA1000 units installed. The continuous operating time will vary according
to the use environment and operating mode.)
o
In order to improve the products, specifications and appearance could be
changed at any time without warning.
o
Weight and dimensions are approximate.
o
Illustrations in this document might differ in part from the actual products.
Warranty explanation
o
The warranty period for this device is one year from the date of purchase.
o
Be aware that repairs will require payment in the following cases even during
the warranty period.
1) Malfunction or damage due to misuse
2) Malfunction or damage caused by modifications or repairs conducted by
any party other than our company or a service person designated by our
company
3) Malfunction or damage caused by dropping, transportation or similar
handling after product delivery
4) Malfunction or damage caused by fire, earthquake, water, lightning or
other natural disaster
5) Malfunction or damage caused by external factors, including power
supplies and equipment environmental conditions, that deviate from the
operation requirements of this product
6) Malfunction or damage if the product was not purchased from our com-
pany or an agent designated by our company
o
We offer paid service after the conclusion of the warranty period. For details,
please contact the retailer where you purchased the unit or a contact on the
back cover of this manual.
o
Be aware that our company will bear no responsibility for any secondary
damages resulting from the operation of this device or related to data.
o
Be aware that our company will bear no responsibility if data recorded by
this device is deleted as a result of misoperation or unexpected incident, for
example.
o
Information is given about products in this manual only for the purpose
of example and does not indicate any guarantees against infringements of
third-party intellectual property rights and other rights related to them. TEAC
Corporation will bear no responsibility for infringements on third-party intellec-
tual property rights or their occurrence because of the use of these products.
DISCLAIMER
TEAC disclaims all warranty, either expressed or implied, with respect to this
product and the accompanying written materials. In no event shall TEAC be lia-
ble for any damages whatsoever (including, without limitation, damages for loss
of business profits, business interruption, loss of business information or other
loss) arising out of the use of or inability to use this product.
Contact information
TEAC CORPORATION
1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan
Phone: +81-42-356-9154
TEAC AMERICA, INC.
10410 Pioneer Blvd. Suite #1, Santa Fe Springs, California 90670, U.S.A
Phone: +1-323-726-0303
TEAC EUROPE GmbH. (EU Importer)
Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany
Phone: +49-(0)611-7158-349
TEAC SALES & TRADING (ShenZhen) CO., LTD.
Room 817, Xinian Center A, Tairan Nine Road West, Shennan Road, Futian District,
Shenzhen, Guangdong Province 518040, China
Phone: +86-755-88311561-2
Company names and product names in this document are the trademarks or registered
trademarks of their respective owners.
1119 MA-3005A
