background image

Tool Bars

                 Check

         Used to check the disc in all the slots currently connected.

                 Quit

         Used to quit the utility. The current window size, position, display mode are then automatically

         saved, and they reappear when stating the utility the next time.

     (3) Windows 95 (CDInfo95)

        (a) Installation

             This utility is installed as a result of installing the TEAC CDP95.

        (b) Functions

             CDInfo95 is a Windows 95 version utility contained in the CD-C68E, and offers the following

             functions in regard to the discs corresponding to slot numbers 1 to 6 (the numbers marked on

             the front bezel):

             1. Displaying information on CD and the volume label

                 To get this display, right-click the desired slot number and select “Change”.

             2. Ejecting CD

                 Right-click the desired slot number and select “Eject”.

             3. Changing the current slot while in Single Drive Letter mode Right-click the desired slot number

                 and select “Change”.

             4. Adding notes to the right of a slot number

                 Right-click the desired slot number and select “Memo”. you can type a maximum of 32

                 characters. Your “Memo” reappears when starting the utility the next time.

        Note: When connecting multiple CD-ROM drives and CD-ROM Changer drives, you can use up to

                 24 drive letters. If you are not using the TEAC drives and device drivers, we cannot guarantee

                 the correct functions.

Menus

        Change/Eject

             Change     : Displays information on the disc corresponding to the selected slot number.

             Eject         : Ejects the disc corresponding to the selected slot number.

             Check All  : Displays information on all the discs.

Summary of Contents for CD-C68E

























Reviews: