Teac CD-C68E, User Manual

        < In Single Drive Letter mode >

           The disc corresponding to the selected slot number is assigned to the current drive letter.

           CD Player or Auto run is automatically executed just after selecting a music CD or a disc

           containing Auto run, respectively.

           A “v” mark is displayed to the right of the slot number corresponding to the current drive letter.

           If you need to check the current drive letter, press F5 or View-Current Slot.

          [ View ]

           This is used to change the current display status. If you change the current view, the changed

           view becomes the default, and when restarting the system, the changed view will appear.

           Tool Bar       : Switches the tool bar on/off.

           Status Bar    : Switches the status bar on/off.

                                  Detects the slot number that specifies the current drive letter.

           Current Slot  : Searches for the currently selected disc.

          [ Custom ]

           Auto Open     : Automatically checks all the drives and slots when starting the system, and

                                  displays information on the discs in use.

           System Tray : Registers in the right side of the task bar.

           Soon Hide     : Automatically returns to the task bar after a change or eject operation is complete.

                                  If this utility is not registered in the task bar, it's not usable.

          [ Help ]

           Displays the Help file in CDInfo95 and information on its version.

        Note: When executing “Change”, the application program automatically  starts if the selected disc contains

               Auto  Run or it is a music disc.

               CDInfo95 displays a dialog box that allows you to check whether auto-executed application

               program is complete or not. If you attempt to check the next disc before completing auto-

               execution application programs, it is possible that an error occurs. If you want to continue to use

               “Change” of CDInfo95, press “Yes” after having ended the auto-executed application program. To

               disable Change, press “No”.

    Tool Bar

                Change

       Used to check the disc in the currently selected slot. See also the paragraph Change/Eject under Menus.

                Eject

       Used to eject the disc in the currently selected slot. See also the paragraph Change/Eject under Menus.

                Task bar

       Used to add this utility to the task bar’s  icon display. (If this utility is not registered in the task bar,

       it’s not usable.)

                Help

       Used to open the Help file in CDInfo95. (An alternative is to press F1.)