Teac CD-C68E, User Manual

    4.3  Disc Change Utility

     (1) DOS (CS.EXE)

        (a) Installation

             This utility is installed as a result of installing the device driver.

        (b) Functions

             CS is a utility that is executed when you respond to the DOS command prompt, the DOS that

             comes with the CD-C68E, and it offers the following functions in regard to the discs corresponding

             to slot numbers 1 to 6 (the numbers marked on the front bezel):

             1. Ejecting CD

                 C:\>CS-E [slot number]

             2. Changing the current slot while in Single Drive Letter mode

                 C:\>CS [slot number]

        Note: You can use CS.EXE only while in Single Drive Letter mode.  To use it, either move the prompt

                 to the directory in which CS.EXE is contained or specify the necessary directory path

                 into AUTOEXEC.BAT. If you are using drives or device drivers other than the TEAC ones,

                 we cannot guarantee the correct functions.

     (2) Windows 3.1 (CDInfo)

        (a) Installation

             This utility is installed as a result of installing the TEAC CDP.

        (b) Functions

             CDInfo is a Windows 3.1 version utility contained in CD-C68E, and offers the following functions

             in regard to the discs corresponding to slot numbers 1 to 6 (the numbers marked

             on the front bezel):

             1. Displaying information on CD and the volume label.

                 To get this display, either double-click the desired slot number, or right-click the slot number,

                 then select “Change”.

             2. Ejecting CD

                 Right-click the desired slot number and select “Eject”.

             3. Changing the current slot while in Single Drive Letter mode

                 Either double-click the desired slot number, or right-click the slot number, then select “Change”.

        Note: When multiple CD-ROM drives and CD-ROM Changer drives are connected, you can use up to

                 24 drive letters. If you are not using the TEAC drives or device drivers, we cannot guarantee

                 the correct functions.