Teac CD-C68E, User Manual

    4.4  Changer Assistance Utility

       The Changer Assistance Utility is a Windows95 utility which automatically makes the necessary

       settings for the TEAC Changer devices.

       After the settings are changed, click the “Apply” button to execute the changes.  If you do not want

       to change the settings, click the “Cancel” button.  All changes (except Auto Run) take effect after

       the system has been restarted.

       (1) Auto Run (automatic execution)

            Enables or disables the Auto Run function.

            When this function is enabled (check box is on), Auto Run is disabled for all connected CD-ROM

            drives.

       (2) Auto Play (automatic play)

            Enables or disables the Auto Play function.  When this function is enabled (check box is on),

            Auto Play is disabled for all connected CD-ROM drives.

       (3) Auto Insert Notification (automatic insertion)

            Enables or disables the Auto Insert Notification function.

            When this function is enabled (check box is on), Auto Insert Notification is disabled for all

            connected CD-ROM drives.

            Click the “Apply” button to execute changes.  Click “Cancel” if you don’t want to apply the changes.

            Changes take effect when the system is restarted.

       (4) Sort Drive Letter (rearrangement of the drive letters)

            Rearranges the drive letters.

            When this function is enabled (check box is on), the drive letters of all connected CD-ROM drives

            are rearranged.  When only one CD-ROM drive is connected, this setting is not required.

            Click the “Apply” button to execute changes.  Click “Cancel” if you don’t want to apply the changes.

            Changes take effect when the system is restarted.

       Notes: Even when more than one CD-ROM drive is connected, rearrangement is not performed correctly

                 in the following cases.

                (a)The target IDs of two or more CD-ROM drives are the same.

                 (b)The LUN of the CD-ROM drive is discontinuous or abnormal.

                 (c)The device driver does not support the Changer.

                 (d)The registry is abnormal.

                 (e)Drive Space is being used.

      (5) Multiple/Single Drive Letter mode

           The Multiple/Single Drive Letter can be switched.

            Click the “Apply” button to execute changes.Click “Cancel” if you don’t want to apply the changes.

           Changes take effect when the system is restarted.

        Note:  If the device driver Teacidec.mpd does not exist in C:\TEAC\SINGLE or C:\TEAC\MULTI directory,

                 the dialog box for specifying the file will open.  Specify the directory path for the directory in

                 which Teacidec.mpd exists.