Teac CD-C68E, User Manual

    4.5  Multiple Drive Letter Mode and Single Drive Letter Mode

     (1) Multiple Drive Letter mode

          Normally the dedicated device driver is installed when connecting the CD-C68E. In this case different

          drive letters are assigned to the individual slots of CD-C68E. This is called the Multiple Drive Letter

          mode.

           If the drive letter E for example is assigned to the first of the six slots, F is assigned to the second slot,

          and so on, as follows:

            Slot 1 E:

            Slot 2 F:

            Slot 3 G:

            Slot 4 H:

            Slot 5 I:

            Slot 6 J:

     (2) Single Drive Letter mode

          In this mode a drive letter is assigned to a drive, not to a slot as in the Multiple Drive Letter mode.

          In other words all the slots have one and the same drive letter; so, with the CD-C68E, accessing

          a specific slot is achieved by changing the current slot by pressing the desired slot button more than

          1 seconds, or by using the Disc Change Utility.

          The disc in slot 1 is the default disc and if the letter E is assigned to the first of the six slot drives,

          the screen will read:

            Slot 1 E:

          If you want to change the current disc slot to slot 2, use the Disc Change Utility to change the

          screen to:

            Slot 2 E:

    Note: To switch from Single Drive Letter mode to Multiple Drive Letter mode and vice versa, install the

             device driver (an alternative is to execute the Changer Assistance Utility).