Settings
Follow the procedures below to open the menu and change
settings.
1
Press the MENU button.
o
You can also press and hold the MENU/ENTER
(
.
/
/
) dial on the main unit to do this.
2
Use the direction (
k
/
j
) buttons to select
the setting you want to change.
Press a direction (
k
/
j
) button repeatedly to cycle
through the settings in the following order.
MP3 Setting
Update
NET Setting
MFE (Music Frequency Enhancement)
ASb (Auto Standby)
o
“MFE” only appears when the source is set to USB/
NET.
o
“MP3 setting” only appears when the source is set
to CD.
o
The setting shown first depends on the current
source.
You can also turn the MENU/ENTER (
.
/
/
) dial
on the main unit to do this.
3
Press the ENTER button.
You can also press the MENU/ENTER (
.
/
/
) dial
on the main unit to do this.
After opening “MP3 setting” or “NET Setting”, repeat
steps
2
and
1
to make a selection in the submenu.
o
You must wait at least one minute after turning the
unit on to select and change the “NET Setting” and
“Update” items.
4
Use the skip (
.
/
/
) buttons to change
setting values.
o
You can also turn the MENU/ENTER (
.
/
/
)
dial on the main unit to do this.
Continued on the next page
e
45
ENGLISH
