background image

42

ENGLISH

 MODE key

The MODE key is used to cycle through the different menus and op-
tions available to put the unit into the different modes, as explained
below.

 ENTER key

The ENTER key is used to confirm the selection of menu items and
options, and also acts as a ‘’start’’ key to start operations.

 MASTER drive

The MASTER drive is used to hold the source CD. This may be a pre-
recorded audio CD or CD-ROM which you have permission to copy, or
a CD-R  disc. The eject button is used to eject the master disc when no
operation is in progress. The indicator on this drive shows when the
disc is being accessed. In the “Play audio” mode (see 

3.5 “Play Audio

Track”

), a prerecorded CD may be inserted into this drive, and played

back, track by track. The headphone jack and volume controls of this
drive are operational in this mode only.

 SLAVE drive

The SLAVE drive holds the destination CD. This must be a CD-R disc.
The eject button is used to eject the slave disc when no operation is in
progress. The indicator on this drive shows when the disc is being
accessed for reading or writing. In the “Play audio mode (see 

3.5 “Play

Audio Track”

), an audio CD may be inserted into this drive and played

back. The headphone jack and volume controls of this drive are opera-
tional in this mode only.

NOTE
If a disc is in a drive and cannot be removed by using the eject
button, you can insert a thin stiff wire (such as the end of a
paperclip) into the hole on the front panel of the drive (under
the tray). This will open the tray.

 

Power On LED

The LED panel is lit after switching on the unit.

2. General Description

Summary of Contents for CD-R-Dupli-4



































Reviews: