Teac CDW-D13, User Manual

TEAC Tower CD Duplicator User’s Manual

i

Safety Precautions

TEAC CD Duplicator systems are high-precision electronic devices. Do not use them in 
any manner other than as specified in this manual. Please read this manual in its entirety 
before you begin the installation procedure. Use of controls, adjustments, or performance 
of procedures other than those specified herein may result in hazardous radiation exposure.

To prevent fire or shock, do not expose the unit to moisture or rain.

To prevent electrical shock, do not attempt to disassemble the CD Duplicator system. Refer 
servicing to authorized personnel.

TEAC CD Duplicator drives utilize a laser beam that can be harmful to your eyes. Do not 
disassemble the cabinet or unit. Do not attempt to look through the front panel or into the 
unit while the power is turned on.

A user who changes or modifies the unit or operating procedures specified herein without 
expressed written approval by the manufacturer will void user authority to operate the 
equipment.

Specifications and features subject to change without notice or obligation.

FCC Radio Frequency Interference Regulations

Warning:

 This equipment generates, uses, and can radiate radio frequency energy and if 

not installed and used in accordance with the instructions contained in this manual, may 
cause harmful interference to radio and television communications. This equipment has 
been tested and found to comply with the limits for a Class B digital device pursuant to 
Subpart J of Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. However, there is no 
guarantee that interference will not occur in a particular installation. To ensure compliance 
with FCC rules, the cable that connects the unit to the computer must be a shielded interface 
cable.

Note:

 Connecting this device to peripheral devices that do not comply with Class B 

requirements or using an unshielded peripheral cable could result in interference to radio 
or television reception. To ensure that the use of this product does not contribute to 
interference, use a shielded interface cable.

If this equipment does cause harmful interference to radio or television reception (which 
can be determined by turning the equipment off and on), the user may try to correct the 
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Move the device and the receiver further apart.
• Connect the equipment to an electrical outlet on a different circuit than the receiver.
• Consult the dealer or an experienced audio television technician.

Also, the following booklet may prove helpful: 

How to Identify and Resolve Radio-TV 

Interference Problems

. It is available from the U.S. Government Printing Office, 

Washington, D.C. 20402, stock number 004-000-00345-4.

The user is cautioned that any changes or modifications not expressly approved by TEAC 
America, Inc. could void the user’s warranty.