background image

24

CARE AND CLEANING

All care and cleaning operations should be carried out with the unit 
unplugged from the mains power.

The surface of the unit can be cleaned with a barely damp cloth and then 
dried carefully.

Never use abrasives, abrasive cloths or chemical solvents .

CARE AND MAINTENANCE

TROUBLESHOOTING

Poor quality radio reception

The aerial signal may not be adequate. Try repositioning the aerial wire (FM) 
or loop aerial (AM).

Alarm not sounding

Check that you have set the correct alarm time, and set the alarm to wake 
you (wake-up mode symbol(s) will be displayed). Check also that the unit 
is set to Standby before you go to bed.

If you have docked an iPhone with the application running, check that 
the application settings are correctly made in the application.

No sound/low volume from AUDIO IN source:

Check that the volume control is turned up on the 

AUX

 source.

No display:

The display dimmer may have been set to low (no backlight).
Press the 

SNOOZE/DIMMER 

button to restore the backlight.

Checking the sleep time remaining:
    

If you want to check the sleep time 

    remaining during the sleep period, 
    press the 

SLEEP 

button.

Cancelling sleep mode:
    

To cancel Sleep mode, set the unit 

    to Standby.

Sleep indicator

Summary of Contents for CRX-300i





























Reviews: