8
POWER SUPPLY
Power Adaptor
1. The unit requires DC 5V
2.0A.
2. Plug the supplied adaptor cable into the connector on the back of the unit and the
other end into a suitable wall socket.
3. Make sure that the output power of the wall outlet matches the required power of the
adaptor.
Note:
If not using the unit for a longer period of time, unplug the adaptor from the wall outlet
and from the unit.
Battery Backup Function
Two 1.5V “AAA” batteries
(not included)
can be installed as a backup option to maintain
the time if electrical power fails. In the event of a power outage, the time will not appear
on the display, however, the clock will continue to operate and the actual time will be
maintained. The clock display will resume once electrical power is restored if using the
backup battery. The backup batteries should be replaced as needed. Remove the
batteries if the unit is not used or stored for long periods of time.
BASIC FUNCTIONS
Switching the Unit On & Off
1. Power the unit as described above.
2. To switch the unit on, press the
STANDBY
/MODE
button once. The
unit will switch on in Bluetooth mode.
3. To switch the other function, press the
STANDBY
/MODE
button.
Note:
Press and Hold the
STANDBY
/MODE
button to go back to Standby mode.
The unit will turn on and switch to BT mode automatically when it is first plugged
