background image

3

FOR YOUR PERSONAL SAFETY

1.

When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.

2.

Do not overload wall outlets and extension cords as this can result in fire or electric shock.

3.

Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord  is subject to
traffic or abuse.  This may result in a shock or fire hazard.

4.

Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous
voltage or other hazards.  Refer all servicing to qualified service personnel.

5.

Never  push  objects  of  any  kind  into  this  television  set  through  cabinet  slots  as  they  may  touch  dangerous  voltage
points  or  short  out  parts  that  could  result  in  a  fire  or  electric  shock.    Never  spill  liquid  of  any  kind  on  the  television  set.

6.

If  the  television  set  has  been  dropped  or  the  cabinet  has  been  damaged,  unplug  this  television  set  from  the  wall  outlet
and refer servicing to qualified service personnel.

7.

If liquid has been spilled into the television set, unplug this television set from the wall outlet  and refer servicing  to
qualified service personnel.

8.

Do not subject your television set to impact of any kind.  Be particularly careful not to damage the picture tube surface.

9.

Unplug this television set from the wall outlet before cleaning.  Do not use liquid cleaners or aerosol cleaners.  Use a
damp cloth for cleaning.

10.1. Do not place this television set on an unstable cart, stand, or table.  The television set may fall, causing serious injury

to a child  or an adult,  and  serious  damage  to  the  appliance.    Use  only  with  a  cart  or  stand  recommended  by  the
manufacturer,  or  sold  with  the  television  set. Wall  or  shelf  mounting  should  follow  the  manufacturer s  instructions,  and
should  use  a  mounting  kit  approved  by  the  manufacturer.

10.2. An  appliance  and  cart  combination  should  be  moved  with  care.  Quick  stops,  excessive  force,  and  uneven  surfaces

may cause the appliance and cart combination to overturn.

CAUTION:

Read  all  of  these  instructions.   Save  these  instructions  for  later  use.  Follow  all  Warnings  and
Instructions marked on the audio equipment.

1. Read Instructions- All the safety and operating instructions should be read before the product is operated.

2. Retain Instructions- The safety and operating instructions should be retained for future reference.

3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.

4. Follow Instructions- All operating and use instructions should be followed.

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for CT-M6855S








































Reviews: