7
DAB/FM Indoor Antenna
Extend the lead vertically and attach it to a window frame or
wall with thumbtacks, or the like, where reception is best.
<
You can check the antenna adjustment or positioning for
the best reception by viewing the signal strength on the
display (see page 25).
Subwoofer
Connect the ‘TO SUBWOOFER’ and the ‘FROM MAIN’
sockets using the supplied cable.
<
Connect the Connectors in the direction as figured.
SPEAKERS
Connect the left speaker’s plug to L, and the right speaker’s
plug to R.
<
If not using the included speakers, make sure the speakers
you use are at least 4
Ω
impedance.
<
Do not connect anything other than speakers to these
terminals.
AC Power Cord
Be sure to connect the power cord to an AC outlet which
supplies the correct voltage.
Hold the power plug when plugging or unplugging the
power cord. Never pull or yank on the power cord.
POWER switch of the Subwoofer
Use this switch to turn the system on or off.
<
If the power switch of the subwoofer turned off, the
settings kept in memory (clock, timer setting) will be erased.
To avoid losing your settings, it is advisable to keep this
switch ON when not in use.
E
D
C
B
A
AUX IN
You can connect a portable audio player to this jack.
Connect the LINE OUT or PHONES jack (audio output jack)
of the player using the supplied stereo mini plug cable.
When using the PHONES jack of your mini player, you must
adjust the volume of the mini-player or you may hear no
sound from your CX-200iDAB.
F
