background image

BASIC OPERATION 

14 

 

3.

 

If there is no disc loaded in the unit, it will auto-detect the memory card and start to 
read and playback compatible media files. Otherwise, press the

 DVD/USB/SD

 button 

to switch to CARD input. 

 

 

NOTE: 

 If another USB stick/memory card is already inserted, the unit will not auto-detect 

the second USB/CARD memory device. Press the 

DVD/USB/SD

 button to switch to the 

desired source. 

 

USB/CARD Multimedia Playback 

Access this feature by entering USB or CARD Mode.

 To play multimedia files, a 

compatible USB device or SD/MMC/MS Card storing compatible media files must be 
connected. 

 

NOTE:  

 

This unit only supports USB devices with a FAT32 file system. It will not support 
NTFS file systems. 

 

This unit supports XVID, AVI, MP3, WMA and JPEG file playback. However, due to 
other variations in file formats, some files may not play even though they are the 
supported file types.

 

 

Music Playback 

1.

 

The music will normally start playing in sequence automatically. Use 



 to navigate 

the file list if you wish to play a specific music file. 

2.

 

Press OK to start playing a selected music track  

3.

 

When the player reaches the end of the file sequence, it will stop playing and display 
the welcome logo. Press the

   button to return to the Multimedia Menu. 

 
During music playback, the following actions are available. 

Pause:

 Press the

   button to pause playback. Press again to resume playing. 

Stop:

 Press the 

 button to stop playback.  

Forward/Rewind:

 Press and hold the 

/

 buttons to fast forward/rewind. Repeat this 

motion to increase the speed. The max speed is 32x. Press PLAY to resume playing. 

Previous/Next track:

 Tap the 

/

 buttons for previous/next track. 

GOTO:

 Press the GOTO button and enter a specific time to jump to in the current track in 

HH:MM:SS format.  

 

Tip: To play specific tracks or a music playlist during the picture slide show start the music 
playback first. Then, press RETURN to go to the Multimedia Menu, and navigate to the 
image files per the instructions below. The music will continue playing after the picture slide 
show starts. 
 

Picture slide show 

1.

 

In the file list, use 



 to choose a picture to start the slide show with. 

2.

 

Press OK to start the slide show. 

 
During the slide show, the following actions are available. 
 

Pause:

 Press the

   button to pause playback. Press again to resume playing. 

Summary of Contents for DVP1012


























Reviews: