Teac DVP705, User Manual

2. AUDIO SETUP

There are three items in the AUDIO
SETUP PAGE. They are ANALOG
AUDIO, DIGITAL AUDIO and DOLBY
DIGITAL .

-12-

SYSTEM SETUP

--AUDIO SETUP PAGE--

SPEAKER SETUP
SPDIF SETUP
DOLBY DIGITAL SETUP
EQUALLZER 

GO TO AUDIO SETUP PAGE

1.5 SCREEN SAVER

ON: If the image remains motionless on the screen, for example the disc is paused,
stopped etc, for several minutes, a screen saver will appear on the screen. You can
press any key or button to wake it up.
OFF: Disable the screen saver function.

1.6 LAST MEMORY

ON: Each time you turn off the unit or stop the disc, it will memorize the last play time.
Next time you turn on the unit and play the same disc, the unit will play from that
memorized point.
OFF: Disable the last memory function.

2.1 SPEAKER SETUP
2.1.1 DOWNMIX MODE

LT/RT: The 5.1-channel audio is mixed into left channel and right channel and 
is output via the FR and FR speaker respectively.
STEREO: The 5.1-channel audio is mixed into stereo signal and is output via 
the FR and FL speaker.
NOTE: This function only applies to the Dolby AC -3 encoded 5.1-channel discs.

2.1.2 OUTPUT DYNAMIC COMPRESS

This function can compress audio signal with wide dynamic range proportionally to 
reduce intense impact to speaker.

2.2 SPDIF SETUP
2.2.1 DIGITAL OUTPUT

SPDIF/ OFF: There will be no digital audio signal output. (Coaxial off)
SPDIF/RAW: The digital audio signal output will be in raw format.
SPDIF/PCM: The digital audio signal output will be in PCM format.

--DOLBY DIGITAL SETUP PAGE--

DUALL MONO           STR                STEREO
                                                       L-MONO
                                                       R-MONO
                                                       MIX-MONO
DYNAMIC                                        

GO TO DOLBY DIGITAL SETUP PAGE

FULL
3 / 4
1 / 2
1 / 4
OFF

2.3 DOLBY DIGITAL SETUP
2.3.1 DUAL MONO

STEREO: The player outputs the left-
channel audio and right-channel audio 
via the FL and FR speaker respectively.
L-MONO: The player outputs the left-
channel audio only via both the FL and 
FR speaker.

2.2.2 LPCM OUTPUT

When DIGITAL OUTPUT is set to SPDIF/PCM, this item is available.
Select a sample rating for the analog audio output. There are two options, 48KHz 
and96KHz.
NOTE: Some amplifiers don't support 96KHz sampling which will affect the coaxial
output.