Teac DVTV3401, Owner'S Manual

Preparations

    Press the DVD/TV button on the remote control 
or the TV to 

turn on the DVD player.

1. Press  OPEN/CLOSE  to  open  the  disc  tray,
    place a disc on the disc tray.
        There  are  two  different disc sizes.  Place  the 
        disc in the correct guide on the disc tray.  If  the 
        disc is out of the guide, it may damage the disc
        and cause the DVD player to malfunction.
        Do not place  a disc which is unplayable  in this 
        DVD player (

see "Playable discs").

2. Press OPEN/CLOSE  to close  the  disc  tray,  the 
    playback will automatically start.

3. Some discs may start playback with a menu. Use 
the cursor buttons on the remote control to select 
menu options and press PLAY/ENTER to start. You
may also press the digit buttons to select a menu 
option directly. Many DVDs will not allow this during 
start-up.

1

. Press PAUSE/STEP  to pause playback (still mode). 

    The sound will be muted during still mode.

2

. Press PLAY/ENTER to resume normal playback.

Pause playback

   Previous and Next

Fast forward and Fast reverse 

1

. Press    FWD        to fast forward through the disc.

    Each time the   FWD      button is pressed, the 
    fast forward motion speed changes.

2

. Press PLAY/ENTER to resume normal playback.

3

. Press   REV         to fast reverse through the disc.

    Each time the   REV      button is pressed, the 
    fast reverse motion speed changes.

4

. Press  PLAY/ENTER  to resume normal playback.

Basic playback

Basic Playback

Basic Playback

Some discs do not start automatically. Press 
PLAY/ENTER to start playback.

During Playing, pressing the PREV      key will 
restart the current chapter and skip chapters 
backwards with each subsequent press until the 
start of the disc is reached.
Each press of NEXT        key during playing will 
skip the current chapter and play the next one.

In the case of CD audio, MP3 and photo discs the 
next track, song or photo is selected.

2.

 Press PLAY/ENTER to playback to resume  play-

    back from the location where playback is stopped
    or from the beginning of the disc.

3.

 Press STOP twice to stop completely.

Stop playback

Single step playback

1. Press STOP        button to stop the disc 
playing. With some discs the player will 
memorize the stop position, such as DVD's 
and audio CD's.

To single step  press the  Pause  button, 
then press  Pause/Step  in continuous steps
to view the next frame.