35
ENGLISH
Settings are stored almost permanently, even when power is
turned off and the unit is unplugged.
If you want to initialize the settings, do as follows;
1. Turn the unit off.
2. With holding down the STOP button, press the POWER
switch.
All the settings in the Setup menu will be reset to the default
settings.
Audio1 A2 Video1 V2 Language
General
SETUP
Move
Exit
Setup Menu Mode
Setup Navigator
Parental Lock
Bonus Group
Auto Disc Menu
Group Playback
Expert
Basic
Off (us)
On
Single
POWER
STOP
How to initialize the settings
Expert (default):
You can access all the settings.
Basic:
Your access is limited to commonly used settings. An
information bar appears to give you short explanation of the
currently highlighted option.
<
Settings marked with the
icon are available only in
Expert mode.
EXPERT
Audio1
A2 Video1 V2 Language General
SETUP
Move
Exit
Audio DRC
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
Digital Out
SACD Playback
Off
On
DTS PCM
Down Sample On
MPEG PCM
On
2ch Area
Audio1
A2 Video1 V2 Language General
SETUP
Move
Exit
Audio DRC
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
Digital Out
SACD Playback
Off
Dolby Digital
Dolby Digital PCM
Down Sample On
MPEG PCM
On
2ch Area
Settings (Audio)
Audio DRC (Dynamic Range Controlling)
In many listening situations, you may find loud passages
objectionable. Adjusting this setting allows you to compress
the sounds into a range that you may find more suitable for a
particular listening situation. Dolby Digital satisfies these
needs through the dynamic range controlling.
Select on or off to fit the individual listening situation of the
audience.
Off (default) :
Audio with uncompressed dynamic range.
On :
Audio with compressed dynamic range.
<
This function is effective only when playing back a DVD disc
recorded with Dolby Digital. This control has no effect on other
discs.
<
The effect of Audio DRC varies depending on your amplifier
and speakers.
<
This function has effect on both analog and digital output. If
you want to use this function with digital output, set "Dolby
Digital Out" to "Dolby Digital-PCM", and "Digital Out" to "On".
Dolby Digital (default):
Select this when the unit is connected to an audio component
equipped with a built-in Dolby Digital decoder via the DIGITAL
OUT terminal.
Dolby Digital
t
PCM:
Select this when the unit is connected to an audio component
such as CD recorder or MD deck via the DIGITAL OUT
terminal. Dolby Digital signal is converted to PCM.
Setup Menu Mode
Dolby Digital Out
