36
Settings (introduction)
If no cursor is visible on the screen, using the left and right
buttons changes between the top tabbed menus.
Use the up and down buttons to highlight menu items within
these tabbed menus. RETURN returns the display to the top
level.
Enter the menu item with the right cursor button.
4
Use the up and down cursor buttons to select the
options within the menu item, and press ENTER to
confirm the entry.
5
Individual menu functions are described on pages 37 through
49.
Repeat
steps through as
required.
Exit the setup mode by pressing SETUP again.
6
5
3
The display on the main menu also gives some menu
messages and allows settings to be made, but it is easier to
use the on-screen display to select these settings (remember
that video output must be turned on!).
Move
Analog Out
Digital Out
CD Digital Direct
Audio DRC
Group Playback
2ch Down Mix
2ch *
ON *
Direct *
OFF *
Single *
Lo/Ro *
Return
Select
Exit
Move
Analog Out
Digital Out
CD Digital Direct
Audio DRC
Group Playback
2ch Down Mix
2ch *
Multi Channel
Return
Select
Exit
Turn on the main unit and the television or monitor.
1
Press the SETUP button.
2
The following appears on screen.
Factory settings are marked with an asterisk “*”.
<
Exit the setup mode by pressing SETUP once again.
<
Although it may be possible to enter the setup screen during
playback or during resume mode, not all menu functions will
be available. Expand the number of available functions by
pressing the STOP button twice.
Use the cursor buttons to navigate the menus.
3
