7
Restoring factory settings
If you have made a lot of changes to the setup, and want to
restart from a known set of options, restore the unit to the
factory default settings as follows:
1. Turn the unit off and wait 30 seconds or longer.
2. Press the POWER switch while holding down the STOP
button.
Hold down the STOP button until the unit has powered up
and the display lights.
All memories are now erased and the unit returns to the
factory default settings.
For European customers
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it means
the product is covered by the European
Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the
local authorities.
3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.
4. For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
Changing the Color System (NTSC/PAL)
If you experience picture distortion or are unable to view the
video image, you may need to change the color setting to
match your TV.
1. Turn the unit off.
2. While holding down the PLAY/PAUSE button on the main
unit, press the POWER switch.
3. While “V Set NTSC” (or “V Set PAL”) is displayed on the front
panel display, press the
/
button.
The display changes to “V Set PAL” (or “V Set NTSC”).
Select “V Set PAL” when a PAL TV (European standard) is
connected. Select “V Set NTSC” when a NTSC TV (American
standard) is connected.
4. Press the POWER switch to turn the unit off.
Note that you have to turn the unit off before each change.
About MOD.(Modulation) PAL:
Most models of the newly developed countdown PAL TV
system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically
switch vertical amplitude, resulting in a display without
vertical shrinkage.
If your PAL TV does not have a V-Hold control, you may not
be able to view NTSC discs because the picture may roll. If the
TV has a V-Hold control, adjust it until the picture stops
rolling. On some TVs, the picture may shrink vertically, leaving
black bands at the top and bottom of the screen. This is not a
malfunction; it is caused by the NTSC-PAL conversion.
Placement of the unit
High-quality hardened tool steel is used for the pin-point feet
attached to the bottom of the unit. Although the outer feet
may appear loose when the unit is lifted, the weight of the
unit causes them to become firm, level and secure when
placed on an appropriate surface. This design effectively
damps and reduces vibration between the cabinet and the
surface where the unit is placed.
<
WARNING: Be careful to avoid injury when moving the unit.
This unit weighs about 32.5 kg (71 5/8 lb). Seek assistance
when moving or placing this product.
<
To protect the supporting furniture surface, you may stick the
felt pads supplied with the unit to the bottom of the metal
feet.
Pin-point foot
Bottom plate
of the unit
Steel foot
Cover foot retaining screws
Cover foot
Frame
