11
ST24C08:
General description:
The ST24C08 is a 8Kbit electrically erasable programmable memory (EEPROM), organized as 4 blocks of 256 * 8 bits.
The memory operates with a power supply value as low as 2.5V. Both Plastic Dual-in-Line and Plastic Small Outline packages
are available.
Features:
n
Minimum 1 million ERASE/WRITE cycles with over 10 years data retention
n
Single supply voltage:4.5 to 5.5V
n
Two wire serial interface, fully IýC-bus compatible
n
Byte and Multibyte write (up to 8 bytes)
n
Page write (up to 16 bytes)
n
Byte, random and sequential read modes
n
Self timed programming cycle
PINNING
PIN VALUE
1. Write protect enable (Ground)
: 0V
2. Not connected (Ground)
: 0V
3. Chip enable input (Ground)
: 0V
4. Ground
: 0V
5. Serial data address input/output
: Input LOW voltage : Min : -0.3V, Max : 0.3*Vcc
Input HIGH voltage: Min : 0.7*Vcc, Max : Vcc+1
6. Serial clock
: Input LOW voltage : Min: -0.3V, Max : 0.3*Vcc
Input HIGH voltage: Min : 0.7*Vcc, Max : Vcc+1
7. Multibyte/Page write mode
: Input LOW voltage : Min: -0.3V, Max :0.5V
Input HIGH voltage: Min : Vcc-0.5, Max : Vcc+1
8. Supply voltage
: Min : 2.5V, Max : 5.5V
G1965M:
Features:
n
TV IF filter with Nyquist slope and sound shelf at typ. 20.4dB
n
High colour carrier level at typ. 1.0dB
n
Constant group delay
n
Insertion attenuation typ. 15.0dB
PINNING
1. Input
2. Input-ground
3. Chip carrier-ground
Summary of Contents for EU-34HT
Page 1: ...SERVICE MANUAL EU 34HT 34cm CTV Effective January 1999 EU34HTSERV ...
Page 19: ...18 GENERAL BLOCK DIAGRAM OF CHASSIS AK26 ...
Page 39: ......
Page 40: ......
