8
Names and functions of parts
B
C D
E
A
F
A
Indicators
POWER: This lights blue when the unit is on.
CHARGE: This lights red when the unit is charging. When charging
completes, it will become unlit.
B
Digital audio input/output and
analog audio input jack
Use this for digital audio input/output or analog audio input.
o
The unit will automatically switch between optical and coaxial
connections.
For digital input:
Optical connection: Use an optical mini plug.
Coaxial connection: Use the included RCA conversion cable.
For analog input:
Use the included RCA conversion cable.
For digital output:
Optical connection: Use an optical mini plug.
Coaxial connection: Use the included RCA conversion cable.
C
Digital/analog switch
Use this to switch between digital input/output and analog input.
If the switch and the cable connected to the connection jack do not
match, audio input and output will not be possible.
o
Use the SETTINGS screen to switch digital input and output.
D
PHONES jack
Connect a headphones plug (3.5mm stereo mini) to this jack.
CAUTION
o
Always minimize the volume before plugging headphones in and
putting them on. While wearing headphones, do not connect or
disconnect them or turn the unit on or off. Doing so could result in
a sudden loud noise that could harm your hearing.
o
Be careful not to mistake the headphones jack for the digital output
jack and vice versa. Doing so could result in odd noises and even
damage to connected equipment.
E
GAIN switch
Use this to change the output level to suit the headphones that you
are using.
H: high output level
L: low output level
Lower the volume before setting this switch to H.
CAUTION
Particularly when using headphones for the first time with this unit, set
the GAIN switch to L and be sure to raise the volume gradually during
playback to check the sound pressure sensitivity.
