Teac HMX2500, User Manual

3.  Disc Basic Operation

Once all the connections and settings have been 
made, the DVD unit is ready for normal use. Prior 
to playback, make sure the following  operations 
have been carried out.
      1. Switch on the TV and select suitable mode. 
          e.g.:

      2. Switch on this DVD unit.
      3. Press the INPUT key on the front panel
          or on the remote control and select DISC. 
LOADING will be  shown on the screen:

If connected by S-Video, then select 

          S-Video mode.

POWER

lf there is no disc, NO DISC 
the screen:

will be  shown on 

Step 2: Press the OPEN/CLOSE key, the tray
comes out automatically. 

Step 3: Place the disc on the tray, press
OPEN/CLOSE  to close the tray, the disc type 
will be shown on the VFD screen.
    

No disc

Open

Loading...

Press PREV key:

PREV

Press NEXT key:

NEXT

2X

F.WARD

Press F.WARD &B.WARD key to get 2X, 4X ,8X, 
16X,32X, normal play circular fast forward & 
backward function 

Press STOP key once to enable memory stop.
Press PLAY to execute continueous place back.
Press STOP key twice to stop playback.

STOP

STOP

B.WARD

2X

3.1 Play disc

PLAY

PAUSE

Press PAUSE key:

Insert a disc into the DVD unit and it will start 
playing automatically. Press PLAY/PAUSE to
temporary stop playback,press it again to 
resume.

OPEN/CLOSE

Press NEXT or PREV to jump to next or previous
track/chapter/file.

NOTE: All images in this manual are 
            illustrations for reference only.