INPUT MODES
10
1.
Make sure that the media play/ TV is turned on.
2.
Switch to AUX1 by pressing
AUX1
on the remote control or main unit.
3.
Start playback on the connected media player/TV.
4.
Adjust the master and/or surround speaker volumes as desired.
MP3/iPhone
Use a 3.5mm auxiliary cable to connect an audio player to the unit and send audio signals to
the home theatre speakers.
Example: iPhone connected to the unit using an auxiliary cable.
1.
Make sure that the iPhone is turned on and has music ready to play on the iPod app.
2.
Switch to MP3/iPhone by pressing
MP3/iPhone
on the remote control or main unit.
3.
Start music playback on the connected iPhone.
4.
Adjust the master and/or surround speaker volumes as desired.
Radio
Listen to radio stations using the in-built FM/AM tuner
1.
Press the
FM/AM
button on the remote control or main unit to switch to FM/AM input
2.
Press the
FM/AM
button again to toggle between FM and AM frequencies if desired.
3.
Press the
SCAN +/-
buttons to adjust the frequency.
Station Memory
1.
To save preset stations, first tune to the desired station with the
SCAN +/-
buttons.
2.
Press the
MEMORY
button.
3.
Press the desired number for the station to be saved to.
Note:
The unit can save up to 10 stations on FM and 10 stations on AM.
Microphone
Connect up to 2 microphones to the unit and broadcast through the speakers. This can be
done in any input mode. The audio input from the microphones will be overlayed on any
existing audio output and can be used for karaoke, etc.
Example: Microphone to be connected to the unit using the jack on the front panel.
1.
Connect the microphone first, then turn on the microphone’s
power.
2.
Adjust the microphone volume using the master microphone volume dial or individual
volume dials as desired.
Bluetooth Operation
Connect wirelessly to the unit using Bluetooth technology and play music through the home
theatre’s speakers.
Example: iPhone connecting to the unit to play music via Bluetooth
Summary of Contents for HTIB500
Page 17: ......
