Note: You may need to activate subtitles
for each channel individually.
Press the
YELLOW
key again to disable the feature.
For further information about captioning, visit the Australian
Caption Centre website at
http://www.auscap.com.au
.
NOTE:
The yellow icon as shown is an indicator for subtitles. There
are times when the broadcaster will enable this feature and the icon
will display however, there are actually no captions available.
Therefore when selecting subtitles you may not get them on screen.
DIGITAL AUDIO
Your product is capable of playing different audio streams available
during the broadcast. Some programs allow you to select 'english'
and 'english5.1' sound. In future you may be able to select 'french',
'german', or other languages. This is dependant upon the broadcast.
The 'english' selection is the default. This is known as MPEG stereo
sound and is available at all times.
The 'english5.1' selection is actually Dolby Digital™ 5.1 sound. It is
only available via the optical TOSLINK connector found at the rear of
the digital receiver. A surround amplifier capable of decoding Dolby
Digital is required.
To change the audio stream, you must first ensure that the PROGRAM
NOW banner is showing by pressing the [
info
] key.
If you see the audio icon, then an
additional audio stream may be
available.
Press the
GREEN
key to change audio streams.
You will then see the "Audio changed"
message at the bottom of the screen
and the audio icon will change.
- 17 -