6
Wall Mounting Information
Stand and wall-mounted (optional)
How to remove/re-install the stand
How to mount the LED TV on the wall
200mm
200mm
Your LED TV is able to accommodate wall mounting with the use of a wall mount bracket (not supplied with LED TV, please
contact your local hardware store) and the mounting hole screw size (M6X8mm) on the back of the unit.
We recommend removing the TV stand prior to mounting the TV on the wall. Please refer to the figures and procedure below.
Follow the instructions below to remove the base of the TV:
1. Place the unit (face down) on a soft surface.
2. Loosen and remove the 4 screws securing the stand to the TV.
3. Gently remove the stand.
4. To reinstall the stand, place the unit (face down) on a soft surface and reverse
the above instructions.
NOTE:
Make sure the power is completely disconnected and unplugged before starting.
1. After detaching the stand, fasten 4 mounting screws (thread size M6X8mm - NOT SUPPLIED. Please contact your
2. Fasten wall mounting bracket (NOT SUPPLIED with LED TV, please contact your local hardware store) with screws
on the wall.
local hardware store) into the 4 screw holes on the rear cover, see the figure below.
3. Carefully check for the strength of the connection before releasing the LED TV.
NOTE
: For more detailed instructions please refer to your “after market” wall mounting instruction book.
Thread hole size – M6 x 8mm depth (TV mounting screw size) on the TV.
Basic Operation
OSD Menu
Multimedia
Operation
Recording
Operation
User Guidance
Information
Maintenance
DVD Operation
and Service