Basic Operation
12
The following section conveys the unit’s general operation, such as, switching the unit on,
selecting the input source, and using the automated channel search command.
Switching the unit on
The following steps are a guide to switch the unit on:
First Time Installation
1.The "First Time Installation" menu will appear on your screen.
1. Connect the television unit to the antenna wall socket using a coax television cable. Connect
any other external devices that will provide video input to the television.
2. Connect the power cord to the power supply and flip the POWER Switch at the back of the TV
to the ON position.
WARNING
: Make sure the power output from your power source matches the power input
labelled on the television adapter.
3. Press the button on the remote control or on the television panel.
4. The on-screen television display should appear.
2. Select Type,OSD Language,Country,Auto Scan,Time Zone then press the OK button to start
the tuning process,This process will find all available channels and store them.
NOTE: Home Mode is a power setting that is
designed to suit home usage and the Energy
Star Rating of this TV is based on Home
Mode. Home Mode is highly recommended
for the best energy efficiency.
Shop Mode is a power setting that is
designed to suit shop display. Energy use is
not optimised and picture settings may reset
automatically.
Basic Operation
OSD Menu
Multimedia
Operation
Recording
Operation
Maintenance
DVD Operation
and Service