–
Problem
•
Solution
No sound /power
–
Volume not adjusted
•
Adjust the VOLUME
–
power cord not securely connected
•
Connect the AC power cord properly
–
•
Display does not function properly /
No reaction to operation of any of
the controls
–
Electrostatic discharge
•
Switch off and unplug the set. Reconnect after a
few seconds
no disc indication
–
No CD inserted
•
Insert a CD, CD-R or CD-RW
–
CD badly scratched or dirty
•
Replace/ clean CD, see Maintenance
–
Laser lens steamed up
•
Wait until lens has cleared
–
CD-R is blank or the disc is not finalized
•
Use a finalized CD-R
CD playback does not work
–
CD badly scratched/ dirty
•
Replace/ clean CD (see maintenance)
–
Laser lens steamed up
•
Wait until lens has adjusted to room temperature
The CDskips tracks
–
CD damaged or dirty
•
Replace or clean CD
–
Program is active
•
Quit Program mode(s)
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
Do not open the set as there is a risk of electric shock.
If you are unable to remedy a problem by following these hints, consult your dealer or service center.
WARNING:
Under no circumstances should you try to repair the set yourself, as this will
invalidate the warranty
.
Environmental information
We have done our best to reduce the packaging and make it easy to separate into 3 materials: cardboard,
paper pulp and expandable polyethylene.
Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe
the local regulations regarding the disposal of packaging, dead batteries and old equipment..
TROUBLESHOOTING
Poor cassette sound quality
–
Dust and dirt on the heads, etc.
•
Clean deck parts etc., see Maintenance
–
Use of incompatible cassette types (METAL
or CHROME)
•
Only use NORMAL (IEC
Recording does not work
–
Cassette tab(s) may be broken
•
Apply a piece of adhesive tape over the
missing tab space
Ｉ
) for recording
EN-
10
SPECIFICATION
EN-
11
Specifications :
Power supply
Dimensions of unit
Frequency range
Antenna
CD Section
CD Size
Speaker System
Battery Size
Phones Jack
: AC 230 V, 50 Hz
: 479(W) X 280 (H) X 245 (D) mm.
: AM 540 - 1600 KHz.
: FM 88 - 108 MHz.
: FM - PIG TAIL ANTENNA.
: AM - FERRITE BAR ANTENNA.
: TOP LOADING CD PLAYER.
: 5
”
& 3
”
COMPATIBLE.
: 2 WAY 2 SPEAKERS SYSTEM
:
“
AAA
”
, UM-4X2 (For Remote)
: 3.5 mm.
Specifications :
Power supply
Dimensions of unit
Frequency range
Antenna
CD Section
CD Size
Speaker System
Battery Size
Phones Jack
: AC 2
4
0 V, 50 Hz
: 479(W) X 280 (H) X 245 (D) mm.
: AM 540 - 1600 KHz.
: FM 88 - 108 Mhz.
: FM - PIG TAIL ANTENNA.
: AM - FERRITE BAR ANTENNA.
: TOP LOADING CD PLAYER.
: 5” & 3” COMPATIBLE.
: 2 WAY 2 SPEAKERS SYSTEM
: “AAA”, UM-4X2 (For Remote)
: 3.5 mm.
