GB – 27 |
MP-8000
3. CONNECTING TO A COMPUTER
Before connecting the player to a PC, make sure to install that
the USB drives are installed. Plug and Play is supported in Win-
dows 2000 and XP or greater. For Windows98SE, you must first
install the USB driver.
3.1 System Requirements
IBM compatible personal computer
Pentium 166MHz or greater
Windows 2000 / XP / 98SE
USB port
32MB RAM or more (64MB is recommended for Windows 2000,
XP)
20MB of available hard disk space
CD-ROM drive (4x CD-ROM drive or greater)
Sound card (optional)
VGA graphics
Internet access (recommended)
3.2 Connecting to a PC
1. Turn on the player and the PC.
2. Plug one end of the USB cable into the player’s USB port.
3. Plug the other end of the USB cable into an open USB port on
the PC.
4. The player automatically switches to USB mode.
5. The player is recognized as removable storage and is assigned
a drive letter. You can view, add, and delete files by navigat-
ing to the player via
My Computer
.
Caution
:
When recording, the player switches to USB mode after the
recording is finished.