GB – 28 |
MP-8000
3.3 Installing the USB Driver (WIN98SE)
1. Insert the installation CD in your computer’s CD-ROM drive.
2. Connect the USB Cable between the MP-8000 and the PC’s
USB port.
3. The Windows OS will automatically detect a new Hardware
device. Then it starts to install the USB driver for WIN98SE.
4. You must select the directory in the CD-ROM drive and put
the USB Driver file.
5. Follow the instructions in the screen to finish installation
3.4 Disconnecting
Prior to disconnect the unit has to be detached at the operat-
ing system. Otherwise data losses may occur. Proceed as fol-
lows:
Double click on the symbol
Remove Hardware or Eject in
the right lower corner of the task bar. (XP: Remove Hardware
Safely). See also the respective pictures:
After carrying out the above steps the unit can be discon-
nected.