3
Z
NP-H750
Release Notes
Firmware update procedures
Copy the “TEAC_NPH750_MCU_BCO_20B0505_S9267_V10057.fw”
updater file to an empty USB flash drive in advance.
NOTE
Uncompress the downloaded file.
1
Press the SOURCE button repeatedly to select net-
work mode.
o
You can also use the remote control's NET button.
2
Press the NET button to select “Internet Radio”.
Each time you press the NET button, the source switches
between Internet radio and media player.
o
You can also use the remote control's NET button.
3
Press the MENU button to select “Setup Menu”.
4
Turn the MULTI JOB knob to select “Software
Update”, and then press the ENTER button.
Device Name Edit
q
Net work
q
Information
q
Software
Update
q
(Return to) Device Name Edit
or
Setup Menu
›Software Update
5
Turn the MULTI JOG knob to select “USB”, and then
press the ENTER button.
“Check USB Memory” will appear on the display.
6
Connect the USB flash drive that contains the “TEAC_
NPH750_MCU_BCO_20B0505_S9267_V10057.fw”
updater file to the USB port in the unit's front panel.
Setup Menu
›Check USB Memory
When the firmware update is completed, the unit will restart
automatically.
7
When the unit has finished restarting, unplug the
power cord from the outlet, and turn the unit on
again.
You will need to adjust the clock and set the timer again.
