23
EN
Program playback (1)
2
3
1
You can create a playback program from up to 99 tracks
from the same disc .
o
Insert a disc before programming.
1
When stopped, press the PROGRAM button.
Programming
Program number
Track number
o
When using a WAV/DSD disc, track numbers are shown
with three digits.
o
You cannot change the program during playback.
2
Use the number buttons to select a track.
Example: To program track number 15
Number of track
at the current
program number
Program number
Repeat step
2
until you have programmed all the
desired tracks.
o
If you try to program more than 99 tracks, “P-FULL"
appears on the display.
o
If you program the wrong track by mistake, press
the CLEAR button to remove the last programmed
track.
o
You cannot program a track number that does not
exist on the disc.
o
Press the stop (
8
) button to clear the entire program.
Continued on the next page
