17
If you a have problem with your system, read this page and
try to solve the problem yourself before calling your dealer
or a TEAC service Center.
General
No power
e
Check the connection to the AC power supply. Check
whether or not the AC source is a switched socket. If it
is, confirm that the switch is turned on.
e
Confirm that there is power to the AC wall socket by
plugging another item such as a lamp or fan into it.
No sound from the speakers.
e
Select the source by the remote control.
e
Adjust the volume.
e
If “Muting” works, press the Muting( ) button.
The sound is noisy.
e
The unit is too close to a TV or similar device. Relocate
it away from the interfering device or turn it off.
The remote control does not work.
e
If the battery is exhausted, replace it with a new one.
e
Use the remote control unit within the operation
range (5 m) and point it at the remote sensor on the
front panel.
e
Remove obstacles between the remote control unit
and the main unit.
e
If a bright light is near the unit, turn it off.
iPod/iPhone/iPad Player
Cannot connect the iPod/iPhone/iPad.
e
Remove dust or obstacles from the dock connector
of SR-60i and the iPod/iPhone/iPad, then connect the
iPod/iPhone/iPad again.
Cannot operate the iPod/iPhone/iPad.
e
Release the iPod/iPhone/iPad HOLD switch.
Cannot play.
e
Before connecting the iPod/iPhone/iPad to the dock
set the iPod/iPhone/iPad “power on”. If the iPod/
iPhone/iPad is connected to the dock with the “power
off” the playback may not start correctly.
e
Remove the iPod/iPhone/iPad from the dock, wait a
few seconds, then connect it again.
e
A software update might solve the problem. Visit the
Apple website and download the latest iPod/iPhone/
iPad software.
USB Player
Will not play.
e
Confirm that there are MP3 files on the USB flash
memory.
MP3
Cannot play.
e
Check the MP3 file extension. This unit recognizes
MP3 files by their “.mp3”.
e
MP3 file data might have been corrupted.
e
The file data format might not be an MP3 format.
e
For more information about playable file formats, see
page 14.
If normal operation cannot be obtained, unplug
the power cord from the outlet and plug it again.
This resets the internal micro-computer which
can be disturbed during electrical storms, power
interruptions, etc.
Troubleshooting
SR-60i_OM_E_vA_B5_CS4.indd 17
10/11/11 8:36 PM
