30
<
The unit can be programmed to turn on
at a specified time. The unit will turn off
60 minutes after the specified time.
<
The unit can store 2 timer settings into
memory.
<
Adjust the clock before setting the timer
(see page 17).
Press and hold the ALARM button (1
or 2) for more than 3 seconds.
The digital clock blinks and the ALARM
indicator (
or
) appears on the
display.
<
If no button is pressed for 60 seconds,
the timer setting mode will be cancelled.
1
Turn the Skip rotary knob (
.
or
/
) to set the start time, and then
press the ALARM button.
<
From step
through
, make sure to
press the same ALARM button you
selected in step .
Turn the Skip rotary knob (
.
or
/
) to select a source (CD, TUNER or
BUZZ), and then press the ALARM
button.
<
You cannot select “AUX”.
<
If you select BUZZ (buzzer), proceed to
step .
6
3
1
4
2
2
Timer 1
STANDBY/ON
ALARM 1/2
SKIP
(
.
/
/
)
