OPERATION
Docking an iPod
1. Turn the Adjustable Dial for iPod until the arrow on the dial is pointing to the listed
iPod model to be docked.
* iPod models and memory sizes that are not listed on the Dock Adjustment Dial
can be docked by manually adjusting the dial to the depth that fits the iPod best.
2. Connect the iPod to the iPod connector inside the Dock for iPod.
* When th unit is plugged in, using AC power the docked iPod will charge. If the unit
is runing on batteries / AM function, the docked iPod will not charge.
Playing an iPod
1. After docking an iPod, adjust the ON / OFF Switch to the ON position.
2. Adjust the Function Switch (FM,AM,iPod,AUX IN) to the iPod position.
3. Press the Play / Pause Button to begin playing the docked iPod.
Tuning the Radio
1. Adjust the ON / OFF Switch to the ON position.
2. Adjust the Function Switch (FM,AM,iPod,AUX IN) to the FM or AM position.
3. Turn the Tuning Knob to the desired station.
4. Extend the Antenna to improve FM radio reception.
* An AM antenna is built into the unit. Adjust the unit to improve AM radio reception.
Using the AUX IN Function
1. Connect an CD player or other audio source to the AUX IN jack using a 3.5mm
auxiliary input cable (Not included).
2. Adjust the ON / OFF Switch to ON position.
3. Adjust the Function Switch (FM,AM,iPod,AUX IN) to the AUX IN position.
4. Audio played from the connected CD player or other audio source will now be heard
through the unit's speakers.
NOMINAL SPECIFICATIONS
Power Supply
: AC 240V 50Hz
Batteries 6 x R14/C/SUM-2 (Not included)
Power Output
: 500 mW RMS
Frequency Range
: FM 87.5 - 108 MHz
AM 522 - 1620 KHz
Frequency Response
: 125 Hz-6KHz
Dimensions
: 273(L)x103(W)x122(H) MM
Weight
: 0.97 KG
Weight and dimensions are approximate because we continually strive to improve our
products, specifications may change without prior notice.
Teac SR-L110I.p65
2009/7/17, ¤U¤È 04:26
4
