10
11
Getting Started
The SR-LXi comes mounted with an adapter
“60GB (color) + Photo 40GB/60GB”. To
play your iPod through the SR-LXi, you have
first to check if the factory mounted adapter
fits your model of iPod. If it does not, you
have to replace it with a correct one, as
explained below.
1. Remove the adapter from the Dock
of the SR-LXi.
Hold the left and right sides of the
adapter and gently pull it up.
2. Choose the Dock adapter that fits
your iPod mobile digital device.
“Video 30GB” for iPod with video (30
GB).
“Video 60GB” for iPod with video (60
GB).
“nano” for iPod nano.
“mini” for iPod mini.
“20GB (color) + Photo 30GB” for iPod
with color display (20GB, 30GB, U2
Special Edition).
“60GB (color) + Photo 40GB/60GB” for
iPod with color display (40GB, 60GB).
“20GB + U2” for iPod with Click Wheel
(20 GB, U2 Special Edition).
“40GB” for iPod with Click Wheel (40
GB).
<
Use a commercially available adapter to
play iPod with dock connector.
Compatible iPod Software
In case your iPod will not work with the SR-
LXi or with the remote control unit,
software update may solve the problem.
Visit the Apple website and download the
latest iPod Software.
iPod is a trademark of Apple Computer,
Inc., registered in the U.S. and other
countries.
1
2
<
When you need to remove the adapter,
hold the left and right sides of the
adapter and gently pull it up.
<
When you don’t use the Dock, use the
supplied cover for the Dock to prevent
dust from settling on the Dock.
3. Insert the adapter into the Dock of
the SR-LXi.
Fit the front edge of the adapter into the
Dock, and then press the back edge of
the adapter onto the Dock until a slight
“click” is heard indicating the adapter is
inserted correctly.
Setting the Clock
Press the skip buttons (
.
/
/
) to
adjust the clock, and then press the
CLOCK ADJ button.
2
Press and hold the CLOCK ADJ button
for more than 3 seconds and release
it when the time display starts
blinking.
1
<
If you leave the unit idle for about 1
minute, the clock setting mode will be
cancelled.
.
/
/
CLOCK
ADJ
TIMER
If the power supply is interrupted, the
settings kept in memory (clock, preset
stations, timer setting) will be erased.
Press the skip buttons (
.
/
/
) to
select Year, and then press the
CLOCK ADJ button.
3
Press the skip buttons (
.
/
/
) to
select Date, and then press the
CLOCK ADJ button.
4
<
Hold down the skip button (
.
or
/
) to adjust the clock continuously.
The clock starts from 00 second.
