11
DRC value
This option sets the Dynamic Range Control (DRC) value to be
applied to received broadcasts. DRC is used to reduce the range
between high and low volumes of audio and is sometimes
applied at the broadcast source. Pop music may have a high
value of DRC applied, appropriate for constantly high listening
levels, while classical music broadcasts may have no DRC applied
to allow the listener to hear the full dynamic range of the source
volume.
There are three values of DRC you can apply.
0
: None
1/2 : Medium
1
: Maximum
While listening to a DAB broadcast press the
FUNCTION/FM MODE button.
Turn the TUNING/SELECT knob until ‘DRC value’ is
displayed in the second line of the display.
Press the ENTER button.
Turn the TUNING/SELECT knob until the desired level of
DRC is displayed in the second line of the display.
Press the ENTER button.
5
4
3
2
1
Manual tune
This option allows you to manually tune in a channel and view a
continuously updated display of the strength of the signal. This
may be useful when adjusting or positioning an antenna for
better reception.
While listening to a DAB broadcast press the
FUNCTION/FM MODE button.
Turn the TUNING/SELECT knob until ‘Manual tune’ is
displayed in the second line of the display.
Press the ENTER button.
‘Manual tune’ is displayed on the first line of the display.
Turn the TUNING/SELECT knob to scroll through the
channel list.
Press the ENTER button when the channel you wish to
tune in is displayed in the second line of the display.
The signal strength indicator is displayed.
While viewing the indicator, adjust or reposition the
antenna until the best reception is indicated.
Press the ENTER button to cancel Manual tune and
resume normal reception.
7
6
5
4
3
2
1
